Interface

• Power supply: PoE and/or 12V/1A DC 
• PoE: 802.3af (Class 0–12.95W) 
• LAN: 10/100BASE-TX with Auto-MDIX, connecting block or RJ-45 pigtail
• Recommended cabling: Cat-5e or higher
• Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog 
• Passive switch: NO/NC contact, up to 30 V / 1 A AC/DC 
• Active switch output: 8 to 12 V DC according to power supply (PoE: 10 V; adapter: source voltage minus 2 V), up to 550 mA 
• Tamper switch is part of the 2N Access Unit 
• Inputs: Passive / active mode (-30 V to +30 V DC)

Fingerprint reader

• Sensor: Optical sensor protected by resistant glass 
• Reliability: Algorithm for fake fingerprint detection 
• Resistance: Resistant to water and dust 
• Ambient light suppression: Also works in direct sunlight 
• Signalling: Acoustic and multicoloured LEDs 
• Sensing area: Large with dimensions of 15.24 x 20.32 mm 
• Certification: certified according to FBI standard

Mechanical properties

• Cover: Robust zinc cast with surface finish 
• Operating temperature: -40°C to 60°C 
• Storage temperature: -40°C to 70°C 
• Operating relative humidity: 10%-95% (non-condensing) 
• Dimensions:
  - Wall (surface) mounting frame 1 module: 107 (W) x 130 (H) x 28 (D) mm
  - Flush mounting frame 1 module: 130 (W) x 153 (H) x 5 (D) mm
  - Flush mounting box (minimum hole dimensions) 1 module: 108 (W) x 131 (H) x 45 (D) mm 
• Weight: max 0.8kg 
• Cover: rating IP54 and IK08