Power supply

• Type: PoE and/or 12 V/1 A DC
• PoE 802.3af (Class 0–12.95 W)

Interfaces

• LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 jack
• Recommended cabling: Cat-5e or better
• Active switch output: 8 to 12 V DC/max 400 mA
• Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
• Inputs: 1 input - in passive/active mode (-30 V to +30 V DC)
• OFF: open or Uin > 1.5 V
• ON: short-circuit or Uin < 1.5 V

Signalling protocol

• SIP (UDP, TCP, TLS)

Audio

• Microphone: 1 integrated microphone
• Amplifier: 5 W (Class D) amplifier
• Speaker: 2 W / 8 Ω
• Sound Pressure Level (SPL max): 78 dB (for 1 kHz at 1 m)
• LINE OUT: 1 VRMS / 600 Ω
• Volume control: adjustable with automatic adaptive mode
• Full duplex: Yes (AEC)
• Audio output: 1.9 W
• Protocols: RTP/SRTP
• Codecs: G.711, G.729, G.722, L16/16kHz

Camera & video

• Sensor: 1/2.7'' color CMOS
• Focal length: 1.9 mm
• Max. view angle: 138° (H), 105° (V)
• Infrared light: Yes
• WDR: Yes
• Minimal illumination: 0.8 lux without IR illumination
• Protocols: RTP/RTSP/RTCP/HTTP, ONVIF v2.4 profile S
• Codecs: MJPEG, H.264, H.265, Zipstream
• Resolution max: Full HD (1920 x 1080)
• Frame rate max: 30 fps

Mobile Application Support

• Android: 6.0 and higher
• iOS: 12.0 and higher

Bluetooth Reader

• Version compatible with Bluetooth 5.0 (BLE)
• Range (short - typically up to 3m*, long - typically up to 10m*)
• *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment

Security

• RSA-1024 and AES-128 encryption
• RX sensitivity up to -93 dBm
• Mode: touch, tap in app, card, motion

RFID Card Reader

• Supported frequencies
  • 125 kHz variant
  • 13.56 MHz variant
  • 125 kHz and 13.56 MHz variant
• Supported card types
  • Card type compatibility depends on Order No.
• 125 kHz
  • EM4xxx
• 13.56 MHz
  • Pass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key)
  • HID Prox – versions with 125 kHz support and S in Order No. Only reads UID (CSN) and secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology
• Secured 13.56 MHz
  • 43A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE)
  • ds secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology
  • Reads PACs ID (HID iClass cards with SIO object)

Touch Keypad

• Technology capacitive touch layer (sensitivity 0.1 pF)
• Reliability regular automatic calibration (SmartSence Auto-tuning) does not detect false touches on wet surface
• Signalling configurable backlight intensity indication using multicolored LEDs acoustic response for every keypad touch

Fingerprint Reader

• Sensor optical sensor protected by resistant glass
• Reliability algorithm for fake fingerprint detection
• Resistance resistant to water and dust
• Signalling acoustic and multicolored LEDs
• Sensing area large with dimensions of 15.24 x 20.32 mm
• Certification certified according to FBI standard

Mechanical Properties

• Frame (cover) robust zinc cast frame with surface finish (nickel and black color)
• Operating temperature -40°C to +60°C (Fingerprint Reader module -20°C to +55°C)
• Storage temperature -40°C to +70°C
• Operating relative humidity 10%-95% (non-condensing)
• Weight 2 kg
• Cover rating IP54 and IK08
• Surface mounting frame – dimensions
  • 1 module 107 (W) x 130 (H) x 28 (D) mm
  • 2 modules 107 (W) x 234 (H) x 28 (D) mm
  • 3 modules 107 (W) x 339 (H) x 28 (D) mm
• Flush mounting frame – dimensions
  • 1 module 130 (W) x 153 (H) x 5 (D) mm
  • 2 modules 130 (W) x 257 (H) x 5 (D) mm
  • 3 modules 130 (W) x 361 (H) x 5 (D) mm
• Flush mounting box (minimum hole dimensions)
  • 1 module 108 (W) x 131 (H) x 45 (D) mm
  • 2 modules 108 (W) x 238 (H) x 45 (D) mm
  • 3 modules 108 (W) x 343 (H) x 45 (D) mm