Type:

Service type

Example: pstn/voip

Field Type: Select box

Protocol:

Protocol provider uses

Example: zaptel/capi

Field Type: Select box

Provider:

Provider name

Example: BT

Field Type: [a-z][0-9]

User Type:

User's relationship to the system

Example:

Field Type: Select box

DTMF Mode (Dual Tone Multi-Frequency):

DTMF mode used by provider. A specific frequency (consisting of two separate tones) to each key so that it can easily be identified by a microprocessor

Example:

Field Type: Select box

National Dialing Code:

National dialing code used at the Provider destination

Example: For USA 1, United Kingdom, Germany 0

Field Type: [0-9]

Leave National Code:

In some countries, national code is stripped automatically. If set to 'Yes', national code will not be stripped from the dialed number. NOTE: Before settings this option to 'Yes', go to 'Settings: Servers' and enable this options as well.

Example: John dials 121255510205. With this option enabled

Field Type: [0-9]

International Dialing Code:

International dialing code used at the provider destination

Example: For USA 011, United Kingdom, Germany 00

Field Type: [0-9]

Local Area Code:

Add local area code to dialed number, if required by service provider. (By default, local area code is stripped when dialing)

Example: User dials 55510205, local area code is 212. If call goes through this provider PBXware will dial 21210205

Field Type: [0-9]