Protocol:

Select protocol UAD(User Agent Device) uses

Example: If UAD/Phone uses SIP protocol, select 'SIP' here

Field Type: Select box

Device Name:

Unique device name

Example: AASTRA 480i

Field Type: [a-z][0-9]

DTMF Mode (Dual Tone Multi-Frequency) :

A specific frequency, consisting of two separate tones. Each key has a specific tone assign to it so it can be easily identified by a microprocessor.

Example: This is a sound heard when dialing digits on touch-tone phones. Each phone has different 'DTMF Mode'. By default, this field is populated automatically for supported devices. If adding other UAD/Phone select between 'inband',  , 'rfc2833' or 'info' options

Field Type: Select box

Status:

Extension status/presence on the network

Example: If this field is set to 'Active', this UAD/Phone will be available in the 'UAD' select box by default when adding new extensions

Field Type: Select Box

NAT (Network Address Translation):

Set the appropriate Extension - PBXware NAT relation

Example:

If Extension 1000 is trying to register with the PBXware from a remote location/network and that network is behind NAT, select the appropriate NAT settings here:

Field Type: Option buttons

Incoming Dial Options:

Advanced dial options for all incoming calls

Example: Please see below for detail list of all available dial options( default: tr )

Field Type: [a-z]

Outgoing Dial Options:

Advanced dial options for all outgoing calls

Example: Please see below for detail list of all available dial options( default: empty )

Field Type: [a-z]

User Agent Auto Provisioning Template:

Example: This option is used for providing additional config parameters for SIP, IAX and MGCP configuration files.

Values provided here will be written into these configuration files.

Field Type: [a-z][0-9]