zapHFC mode:

Set BRI card mode

Example:

Field Type: Select box

qozap ports:

Set the QuadBRI card mode.

Example:

Field Type: Select box

Safe BRI mode

Should safe BRI mode be activated

Example: Select 'Yes' to enable

Field Type: Option button

t1e1override:

Overrides the jumper settings. The decimal value between 0 and 15 correspond to binary from 0000 to 1111. 0 is T1 and 1 is E1.

Example:

(Decimal  |  Binary)

     0       |   0000

     1       |   0001

     2       |   0010

     3       |   0011

     4       |   0100

     5       |   0101

     6       |   0110

     7       |   0111

     8       |   1000

     9       |   1001

     10     |   1010

     11     |   1011

     12     |   1100

     13     |   1101

     14     |   1110

     15     |   1111

Field Type: Select box

Unload modules on stop:

Should PBXware unload all modules used by ISDN cards when PBXware stops

Example: Select 'Yes' and Reboot the PBXware if ISDN card cannot be auto-configured

Field Type: Option button

Shutdown spans on ztcfg:

Should card ports be shutdown when ztcfg command is executed

Example: This option is enabled if using Junghans card in combination with other cards

Field Type: Option button