These are system and network fields necessary for proper system operation.

Root Password/Confirm Root Password:

System root password used when logging into system(root), setup wizard and licensing upgrades

Example: mypassword

Field Type: String, [0-9]

Chroot Timezone:

Time zone system is located or operated from

Example: USA/Eash-coast

Field Type: Select box

Hostname:

System hostname

Example: PBXware

Field Type: String

Server Name:

Custom server name that will appear in notification emails

Example: PBXware192.168.1.1

Field Type: String, [0-9]

DHCP (Yes/No):

Is the system going to obtain network details from available DHCP server

Example: Yes, No

Field Type: Option buttons

IP Address:

System static IP address on local network

Example: 192.168.1.8

Field Type: IP address

Netmask:

Applied netmask

Example: 255.255.255.0

Field Type: IP address

Gateway:

Network gateway IP address

Example: 192.168.1.1

Field Type: IP address

DNS server:

DNS server IP address.

Example: 192.168.1.1

Field Type: IP address

Start DHCP server:

Should PBXware act as a DHCP server. If enabled PBXware will have static IP 192.168.1.99 and will assign IP addresses from 192.168.1.100 and upwards. In this case provided static address in 'IP Address' field must be less then 192.168.1.99(In this case PBXware will be available via provided static IP address and 192.168.1.99)

Example: Yes, No

Field Type: Option buttons

NOTE: Start DHCP server option is available with appliances, mirco disk and compact flash delivery methods only. The network details (IP, Netmask, Gateway and DNS Server) field are not available with virtual server delivery method.