Availability: Discontinued
PIKA for Asterisk Low Density Analog Boards with DSP based echo cancellation plug-in to computer systems to connect your applications to both TDM and IP networks. They are a 4-port, half-length boards with a PCI interface that supports the new universal 3.3 volt power bus.
With 20 proven years experience in the board market, PIKA has evolved its TDM interface cards to fully integrate into an Asterisk Open Source PBX application and provides the most reliable choice for your Asterisk application.
Features & Benefits
- Single slot PCI card (PCI - x compatible)
- Software configurable as 4 loop start interfaces or 3 loop start plus one headset
- DSP based echo cancellation for superior quality
- 2 ports fax included at no additional cost
- Installation is as simple as downloading and installing the Pika channel driver for Asterisk and plugging in the boards!
- Pika provides no charge technical support to help you get your Asterisk application up and running
Technical Specifications
Analog line circuits - 4 loop start
Host interface bus type - PCI (PCI - x compatible)
DSPs: On-board DSPs - 1 (see note)
Chip Type - Motorola 56303
Memory - 128k
Clock Speed - 100MHz
Instruction Speed - 100 MIPs
Supported OS - Red Hat Enterprise, 4 Fedora Core 4, SuSE 10, AstLinux
Host Interface
Loop Start Trunk Interfaces (CO Interface Circuit) - On-hook audio reception
DC resistance - North America: 360-140 ohms over 15-120 mA typical, Euro version: 470-154 ohms over 14-130 mA typical
Network Interface - RJ14 connectors / RJ22 for headset/handset
Loop range - 0-2000 ohms
AC impedance - 600 ohms ( North America ) or complex (Euro version)
Supervision - loop current drop, battery reversal, ringing
Signaling - off-hook, flash, DTMF
Loop current range - North America: 15-120 mA Euro version: 14-130 mA
Compliance and Capabilities - FCC part 15 and FCC Part 68, Industry Canada CS-03, CSA C22.2 no.
950 NRTL/C, TBR21, EU 55022: 1998 Class B, EU 55024:1998, EU 60950:1992, 2002 / 95 / EC RoHS 6
DSP - Motorola 56303 DSP, Software reset on per DSP basis
Media Capabilities - DTMF, tone, speech detection DTMF, tone generation Fax
Country Approvals - North America, European Union
Power Requirements - 355 mA
Operating Temperature: 0 °C to +60 °C
Storage Temperature: -20 °C to +85 °C
Humidity, Non-condensing - 5% to 95%
Mean Time Between Failure (MTBF) - North America variant 47 years EURO variant 45 years
Warranty
Pika provides 3 year warranty on all boards
Product Support
Pika provides no charge support on all products.
Visit http://www.pikatechnologies.com/contact/index.htm
