Availability: Discontinued
Please note that the Vegastream Vega 400 Gateway has been discontinued. We recommend the Sangoma Vegastream Vega 400 as a good alternative.
Vegastream Vega 400 - 4 x E1 (30 Channels)
The Vega 400 digital gateway connects digital telephony equipment to IP networks. All Vega 400 gateways have four E1 / T1 interfaces and can be purchased with various VoIP capacities up to 120 VoIP channels.
The Vega 400 has been designed with future expansion in mind and consists of:
- Base Vega 400 unit with expansion slots
- Field-installable expansion modules to provide additional VoIP channel capacity
A Vega 400 unit can therefore be installed with one VoIP channel capacity and then later additional capacity can be provisioned as and when it is needed.
Each E1 / T1 interface can be independently configured as network side or terminal side. The Vega 400 gateway can, therefore, be connected to a PBX and the PSTN simultaneously. This configuration provides:
- No disruption to the configuration of existing equipment
- Flexibility and choice for call routing
Open, Non-Proprietary Interfaces
The Vega 400 gateway supports the following signaling schemes:
- ETSI ISDN
- NI1, NI2, AT&T 5ESS, DMS100
- ISO QSIG Basic Call and QSIG feature transparency
- Channel Associated Signaling (CAS)
All VegaStream gateways can support SIP, H.323 and T.38 fax.
The Vega 400 gateway has proven interoperability with a wide range of existing telecommunications and VoIP equipment.
Interfaces VoIP Protocols
- SIP
- H.323 version 4
- Audio codecs:
- G.723.1 (5.3/6.4 kbps)
- G.729a (8 kbps)
- G.711 (a-law/µ-law) (64 kbps)
- Fax Support - up to G3 fax, using T.38
- Modem Support - up to V.90, using G.711
- Up to 120 VoIP channels
Telephony Interface Primary Rate ISDN (User configurable NT/TE):
4 x E1
- Euro-ISDN
- ISO QSIG
- QSIG Feature Transparency (H.323)
- CAS R2MFC
4 x T1
- NI1/NI2
- AT&T 5ESS
- DMS100
- CAS (RBS) - E&M wink start - Loop start - Ground start
- ISO QSIG
- QSIG Feature Transparency (H.323)
LAN Interface
- 2 x 10 BaseT / 100 BaseTX, full or half duplex
Features
Identification
- Caller ID presentation
- Caller ID screening allows connections to be accepted only from selected call sources
- H.323 gatekeeper registration
- SIP Registration and Digest Authentication
Operations, Maintenance and Billing
- HTTP web server
- Radius Accounting
- Remote firmware upgrade:
- Auto code upgrade
- Auto configuration upgrade
- SNMP
- TFTP/FTP support
- VT100 - RS232/Telnet
Routing and Numbering
- Dial Planner - sophisticated call routing capabilities, standalone or gatekeeper/proxy integration
- Direct Dialing In (DDI)
- SIP registration to multiple proxies
- NAT traversal
Call Quality
- Adaptive jitter removal
- Comfort noise generation
- Silence suppression
- 802.1p/Q VLAN tagging
- Differentiated Services (DiffServ)
- Type of Service (ToS)
- QoS statistics reporting
- Echo cancellation (G.168 up to 128ms)
Hardware Certification
Environmental
- 0° .. 40°C
- 0% .. 90% humidity (non-condensing)
Indicators LED:
- Power
- ISDN: NT/TE and Link up
- > LAN: Speed, Activity
Physical Dimensions
- 437mm (17.2") x 43mm (1.7") x 275mm (10.8") width/height/depth
- Industrial rackmount: 483mm (19"), 1U
- Weight: 6.5kgs
Power
- 100..240 VAC, 47..63 Hz, 1..0.5 A
- -48V DC also available, 1.2A (Max)
