Trunk:

Select the trunk DID will pickup the calls from

Example: If you select '2554433' for example,  DID will wait for any incoming calls over that trunk and then will pass the call further based on the settings below

Field Type: Select box

DID/Channel (start):

Provide a DID number here ( e.g. 55510205)

Example: If selected 'Trunk' is PSTN or VOIP, set the line number here

Field Type: [0-9]

Destination:

PBXware destination DID will transfer all calls to (Extensions, IVRs, Queues, Voicemails, Remote Access, Conferences and even to Fax to Email service)

Example:

Field Type: Select box

Value:

Destination extension all DID calls will be transferred to.

Example: If 'Destination'='Extension', set the extension number here(e.g. 1002). In case 'Destination'='IVR', set the IVR extension number here

Field Type: [0-9]

NOTE:

If using 'Fax to email', set this field to email address ([email protected]) or extension number (1002). If extension number is used fax will go to email address associated to extension.

In order to send fax remotely set this field to 'remote:fax'